Auto Spraying Machine SPM1300S

Characteristic:

- With pin type rod conveyor, no need cleaning system

- Reciprocators adopt servo control system. The max. speed can reach 100m/min. There are 2 reciprocating arms of each machine.

- Every reciprocating arm can equip 4 spraying guns and 1 relevant material-supply pump.

- The grating scanner at the entrance can measure the width of workpiece to make the stroke of guns and turn on/off time more exact. And at the same time the waste is reduced.

- The spraying parameter is set by the operator on the industrial PC

- Using PLC control system makes it a simple and intuitive instrument to see.

- The alarm lamp on the cabinet, when the device is overrun or fault, it will give alarm.

- Double filtering of the inlet air and closed spraying room make the air cleaner in the spraying room.

- The filter replacement detection device to remind you when you change the filter cotton

- Water is used to filter the paint fog

- The blower with large horse power is installed to take the fog out of the spraying room